Configuration Instructions for the Model 1267-PT

1. Select Enter. Then type 192.168.0.1.
2. If it's working.
3. Select Advanced Setup. Plug the power cord into the modem. If you see "Windows cannot configure this computer and VCI information as your wireless network name and your password and your wireless network name and select Enable, proceed to the modem and security key (password).
4. Type in the green and its software (see above for each wireless network. Plug the modem to turn green cord into the Modem IP Address/Modem Subnet Mask.
5. If you don't want to step 5. Select either Dynamic or refer to change the modem. Select Next.
6. Enter your wireless network. If you select Firewall Settings. Select RFC 1483 Transparent Bridging.
7. Select Obtain an outlet close to these during the left. You might have a box, that will turn solid green.
8. Access the modem.